Write a review
5056159281277

Order any size custom drain cover / gully grid made to order customised (Please read ordering guide in the description)

£2753
In stock

Note: If some options disappear please refresh the page to start again. Or change thickness back to the 6mm default.


^ Please confirm you have read the table of suitable thicknesses in the description below.
^ Read about our material choices and finishes below in the description.
^ Please read about suitable thicknesses for sizes and uses in the table below.
If you choose this please e-mail us a template or description after you order.
^ Click here to upload a file (.dwg, .pdf, .ai, .jpg, .png, .tiff)
+
Compare

Description

Custom sized drain covers, made to order. If you can't find something to fit an odd size then we can make it for you.
Any shape, any size, any design is possible. You can order right here on this page, sit back and have it delivered in a few days.
  • Quick turnaround, with express options on checkout.
  • Precise cutting to your requirements.
  • Lots of finishes to choose from.
  • Corrosion resistant options to satisfy driveway and pathway use.
  • Drain pipe cut outs can be added at no extra charge, please include a diagram with dimensions in the upload box, or you can describe your requirements in the cutting notes box also.
  • Extremely rat and wind proof.
  • How to order, it's quite easy despite all the explanations below! If in doubt just checkout with as much information as you have and we'll get in touch if anything needs clarifying. 
  • Check the chart (below and in images): Important! If your drain cover is in a place where it can be walked on or driven on then please check the chart for a suitable material and thickness for safety.
  • Select your units of measurement: You can supply your measurements in Millimeters (default), Centimeters or in Inches. Please measure accurately as custom made drain covers are only returnable in standard sizes and design.
  • Enter the maximum width and length. This is the largest length and width of a rectangle or square that your drain cover would fit inside.
  • Select your finish / Material: We have several finishes and materials to pick from. Please read below for more information about each option.
  • Select your thickness: Please enter how thick you require your custom made drain cover to be. There is a chart of advisable minimum thicknesses below that can help you here.
  • Select your design complexity: Please select if your drain cover is just a simple shape as requested or more complicated such as with pipe holes, or a complicated custom shape with or without pipe holes.
  • Select the drain cover shape (Type): Please select the drain cover shape that best describes your requirements.
  • Cutting notes: Please enter any cutting notes or requirements here. If you can describe your drain cover easilly then there is no need for a diagram. For example you could enter "Please cut a 157mm square drain cover", or "Please cut a 285mm round drain cover with a drain pipe hole 53mm diameter 20mm in from the edge".
  • Cutting diagram upload: If you have your own design, or want to upload us a image or photo of a drawing with dimensions on you can upload this here.
  • Chart of advisable thicknesses and materials for different uses
    You can choose any thickness for uses where the cover is small, or people can't stand on it. Likewise if it's not a safety critical item you are free to choose. The below thicknesses are what is required to withstand the required test loads for the use of pathways and driveways. You will also need to pick a material that is corrosion proof below should you wish to be up to standard, more information on materials is after this chart.
    Shortest edge of cover
    Minimum thickness pedestrian
    Minimum thickness driveway
    30-125mm (1" - 4.9")
    6mm
    6mm
    126-175mm (5" - 7")
    6mm
    8mm
    176-225mm (7" - 8.8")
    8mm
    12mm
    226-249mm (8.8" - 9.8")
    10mm
    15mm
    250-299mm (9.8" - 11.7")
    12mm
    20mm
    300-345mm (11.7" - 13.6")
    15mm
    25-30mm
    346-400mm (13.6" - 16")
    20mm
    Contact us

    Chart of advisable thicknesses and materials for different uses

    We offer a variety of materials to have your drain cover produced from.

    A) Painted mild steel: This material is great for out of the way locations that can't be walked on such as under drain pipes, or on roofs.

    B) Unpainted mild steel: If you want to send your drain cover off to be galvanised, or need it for a fireplace or just want to paint it yourself. This option is for you.

    C) Stainless steel: This option can be painted as well, just add your paint request to the order notes. Stainless steel is corrosion resistant so will last an extremely long time and satisfy standards for use on pathways or driveways.

    D) Stainless steel painted: Stainless steel is corrosion resistant so will last an extremely long time and satisfy standards for use on pathways or driveways. You can have this painted by standard in the following options: Matt Black, Antique Copper, Antique silver, Gloss Red.

    E) Weathering Steel: We typically use Cor-ten but sometimes other brands are used, this is a weathering steel. It will go a orange/brown initially and then weather to a deep smooth brown oxide finish over time. This layer of oxide protects the steel inside from corrosion. This option will also last a long time and can look very nice as well.

    F) Antique Copper / Silver painted steel: As per option A (Painted mild steel) But these are hammered effect copper or silver with black powder coat instead of matt black. 

    Other products that may interest you:
  • If you're looking some metal wall art for your home or garden please click here.
  • If you're looking to have us cut something from metal that isn't a drain cover then please click here.
  • About our drain covers.
    Our state of the art laser can produce exceptionally high quality drain covers to your requirements. You can order right here on our website with ease, then, just sit back and put your feet up while we get the parts to your door in a few days.

    As standard we will ship your order within 3 working days on a 48 hour courier, although often this will ship on a 24 hour service regardless. We also offer express upgrades on checkout if you are in a rush.

    Please view our Frequently asked questions tab on this page, as well as our Delivery tab for more information on what to expect from our service.

    We're based in the North west, UK in Cumbria and would love the opportunity to produce your items. 
    A video of our laser cutting 8mm stainless steel drain covers.

    FAQ

    Can you cut other custom parts instead of drain covers?
    Neil Bowen
    Yes we can. You can checkout and order on the website via our custom cutting option. Click on the main menu and it's the first link down. Alternatively please contact us to discuss your requirements. 
    What finish does the stainless steel drain cover have?
    Neil Bowen
    The stainless steel covers have a brushed finish as standard, if you would like a stainless cover powder coated in Matt Black, Antique copper or Antique silver this can also be done at no extra charge. Please add this to the notes box when adding your drain cover to your basket.
    How long does it take for a custom drain cover to be delivered?
    Neil Bowen
    Custom drain covers can take up to 3 working days to dispatch.  We do aim to get these produced more quickly than this but depending on the design and if it needs powder coating they can take up to this long. We ship these on a 24-hour courier normally as standard but sometimes use a 48-hour service. There are express options on checkout which speed up both the shipping and dispatch/cutting time. 
    Can I return a custom drain cover if I change my mind?
    Neil Bowen
    Unfortunately this is not possible as we will have to dispose of them. If we of course have produced them incorrectly then we can discuss replacements or a refund as is suitable.
    Can I get a VAT invoice?
    Neil Bowen
    Yes, this should be emailed to you automatically once your order ships. If you don't receive it then please contact us so we can fix this for you.
    Can you powder coat the corten drain covers?
    Neil Bowen
    We can powder coat the corten drain covers thought it is not necessary unless you prefer it for aesthetic reasons.  If you would like it to be powder coated please get in touch. If you do want a corrosion resistant drain cover that is painted a better choice would be Stainless steel.
    How can I send you the information or dimension if I need a cut out?
    Neil Bowen
    You can add your order notes/description as well as a image or diagram to the website while you order your drain cover.Should you wish to send us additional information please email sales@lakelandsteel.uk including your order number.
    Do you sell the surround / base for your gully grids / drain covers?
    Neil Bowen
    We do not sell these, we only produce replacement or upgrade drain covers for existing fittings at this time.
    Collapse

    Features

    BRAND
    Hawkshead Metal
    Condition
    new
    Dimensions
    30mm to 1500mm
    Finish
    All available
    General
    Drain covers & Gully grids
    GTIN
    5056159281277
    Material
    All available
    MPN
    5056159281277
    PRODUCT
    Custom drain cover, any material, any size
    Thickness
    All available
    Warranty
    We offer a 2 year warranty on powder coated drain covers (this excludes paint wear if placed on a driveway or footpath where gravel is present). We offer a 5 year warranty on Cor-ten weathering steel and stainless steel drain covers.
    Find similar

    Often bought together

    Delivery details

    All our products have a free shipping option to UK Mainland addresses.
    We are happy to ship items worldwide, most countries will be offered post at checkout without an issue.

    We ship most of our free items on a 24-hour courier service but we also use 48-hour for certain product sizes and weights. Upgraded shipping and processing is available on checkout from £8.

    View our full shipping policy here

    Order type A: Standard products and stocked items:
    (If you have any Custom orders, cut to size sheet or personalised orders as well, then your whole order will be shipped as Order type B below)

    1) Standard delivery - £0.00    
    Your order will be dispatched within 2 working days if stocked on standard delivery, almost all stocked items will dispatch within 1 working day however. Most items will ship on a 24 hour service on standard delivery but some heavy items or large items may go on a 48 hour service. 

    2) Quicker delivery - £8.00
    Your order will be dispatched within 1 working day (Cut off time 13:00). All orders except extremely large or heavy items will go on a 24 hour service. Some may go on a AM service on occasion. Typically items over 2000mm in length or over 60Kg will be those that do not always go on a 24 hour service. 

    3)  Express delivery - £19.00
    Your order will be dispatched within 1 working day, most orders on this option will go same working day (Cut off time 13:00). Your order will be shipped on a AM service. Some heavy or large orders may only be possible to go via a 24 hour service, and in rare cases only a 48 hour option is available.

    4)  Drop everything and do my order - £70.00
    This option is typically for custom cut orders to jump the cutting and finishing queue, but can be used on stock items. We will drop everything and ship your order straight away on the best shipping service available to a 10:30am service and where the cost to us does not exceed £70.00 extra over standard shipping. 

    Order type B: Custom orders, cut to size sheet orders, personalised orders:

    1) Standard delivery - £0.00
    Custom orders will be cut by standard within 3 working days, our average dispatch is between 1 and 2 working days.
    Your item will be shipped on a 24 hour courier where  possible, but it may go on a 48 hour one for certain weights and package sizes (typically 20-30Kg upwards or very long pieces over 1400mm).

    2) Quicker delivery - £8.00
    Custom orders will be cut by standard in 1-2 working days.
    Your item will be shipped on a 24 hour courier (there maybe a few exceptions such as very heavy items over 60Kg which will require a 48 hour pallet service).

    3)  Express delivery - £19.00
    Custom orders will be cut within 1-2 working days but prioritised, our average on express is 1 working day.
    Your item will be shipped on a 24 hour AM service (some exceptions may occur such as pallet items where next day service will be booked).

    4)  Drop everything and do my order - £70.00
    Custom orders will be cut within 1 working day, we aim to cut and ship the same day of order if placed by 11am. Typically with finishing and packaging timescales we find 60% of orders ship same day and 40% the following day on this service.
    Your item will be shipped on the best available service to 10:30am for the item size that does not exceed the £70.00 fee. This typically is a 10:30am service for items to 60Kg in weight and next day for heavier pallet items.
    Sometimes a AM pallet service is available. Please contact us if you need more definite time scales.

    This is a snippet of the most relevant parts of our policy for this product, there is more information on the full policy at this page View our full shipping policy here.


    Reviews

    5
    5 out of 5
    Reviews: 1
    5 stars
    100%
    4 stars
    0%
    3 stars
    0%
    2 stars
    0%
    1 star
    0%
    Alice Hope
    5
    Comment
    Excellent! I could not find a replacement for an old drain cover that cracked anywhere.

    I had one made to order and in place in just 2 days. Thank you.

    Who we are

    Among the peaceful hills with the odd ball of wool trotting around, we're buzzing away creating things we feel are special.

    Lakeland Steel (Laser Factory Ltd) is a laser cutting company based in the Lake District, Cumbria. All our products are designed and produced here. Among the peaceful hills with the odd ball of wool trotting around, we're buzzing away creating things we feel are special. We are just as happy cutting customers parts, or producing our own products. If you need some metal and don't or can't create it yourself, then we're happy to help.

    Towards the end of 2014 I spotted a stainless steel key ring someone had made on my social media and I thought it looked amazing. Almost immediately I thought, well how hard could it be to make metal items myself?

    After a few evenings of slightly over ambitious hunting on the internet I decided that I could just about afford a CNC Plasma machine. This particular machine was an air plasma and it uses compressed air and electricity to make an incredibly hot plasma cutting arc that moves over the metal plate.

    6 weeks later and the new machine was installed in a barn section a little bigger than a single garage and ready to run. It quickly became clear that an air plasma does not cut quite fine enough to make key rings and I should have done a few more days research! And as a result new projects were born that the machine was suitable for.

    The first item I needed was a drain cover for a down pipe cover on the old house I lived in. Nothing was available in the size I needed (12.5" x 11.9") so I cut one myself. Spray painted it with Black Hammerite paint and thought I may as well list them on eBay. Within an hour we sold one, and I panicked as the paint wasn't even dry yet in the make shift spray painting "zone".

    We've not looked back since and quickly ventured in to metal wall art which also started to fly off the shelves faster than expected.

    It was not long before we had to move to a larger industrial premises and the closest destination available at the time was in the west Cumbrian coastal town of Millom. This is now where we produce all of our products and house our machinery. Millom has a long history of metal works and although the Iron works are now gone we feel like we've ended up in the right spot.

    In a blink of an eye there were simply not enough hours in the day and we started employing some incredible staff and had to hang up the one man band hat. The team has only got stronger over the years, and everyone enjoys the process of bringing our creations to life. And I have to admit it's true that often someone else can do something better than you can yourself, even if it was a little daunting handing over control of parts of the process to someone else.

    Eventually we bought with the help of a good friend and new business partner our first laser and a much chunkier HD XPR Plasma cutter. This now allowed us to cut the keyrings that started our journey as well as improving the cut quality of all our metal art work.

    The next step was to escape from the mess and hassle of wet painting our products. We installed a high end powder coating booth, spray gun and oven. This gives us a better finish, and a huge variety of finishes too. But the biggest advantage, we can now paint and ship items the same day instead of waiting for a week or two for the wet paint to be dry enough.

    A few years passed of non stop ideas and projects before we upgraded to a powerful 6kw laser and we were finally plasma free in 2020. All our metals up to 30mm can now be cut by laser.

    Our laser cutters offer by far the best cut, and the machine we now use was an unimaginable dream back in 2014.

    Finally in 2021 we expanded into Jewellery with the addition of some special polishing machines, and a ultra fine laser cutter & engraver for the jewellery. It can only cut up to 154mm x 154mm in size but offers really incredible cut quality and detail. We've started making exciting new products here and so far everything we've been offering has again caught us out by selling quicker than we thought they might. At least we're kept on our toes!

    As it stands today we've learnt an awful lot and know how to extract great products, art, projects and customers parts from a sheet of metal with ease.
    Our quality, tolerances and repeatability are excellent, and we're excited to work for either a one off part or a bulk order of thousands of items.